Petrol Interceptors:<< Back to JFC Civils |
Interceptors Surface water drains normally discharge to a watercourse or indirectly into underground waters via a soak away. Contamination of surface water by oil, chemicals or suspended solids can cause these discharges to have a serious impact on the receiving water. Interceptors are installed to protect receiving waters from oil pollution.Application Designed for surface water applications, Interceptors remove pollutants from effluent and allow the cleaner water to be passed into a surface water drainage system. Pollutants are retained for removal and disposal. Interceptors work by allowing the pollutants and water to naturally separate out from one another. Pollutants will float on the surface of the water and can then be drawn off. Silt will also settle within the unit and can also be drawn off. All units are manufactured to IS EN ISO; 9001:2000 and conform to European Standard PR EN 858 – 1 & 2. |
|||
| Full Retention Interceptor All Surface water treated Used on high risk sites Sized in litres per second flow Available in Class 1 and Class 2 formats Class 1: Includes coalescer and closure device, treating 100% of flow to achieve a concentration of 5mg/litre of oil Class 2: Achieves concentration of 100mg/litre of oil |
 |
Bypass Interceptor Used on low risk sites (Car Parks) Sized in litres per second flow Available in Class 1 and Class 2 formats |
Model |
Drainage Area |
Nominal Flow |
Peak Flow |
Oil Storage |
NSB Ref |
BPDA1950 |
1950m/2 |
3.5 l/s |
35 l/s |
52.5 Lts |
3.5 |
BPDA2500 |
2500m/2 |
4.5 l/s |
45 l/s |
67.5 Lts |
4.5 |
BPDA3300 |
3300m/2 |
6.0 l/s |
60 l/s |
90 Lts |
6 |
BPDA4400 |
4400m/2 |
8.0 l/s |
80 l/s |
120 Lts |
8 |
BPDA5555 |
5555m/2 |
10.0 l/s |
100 l/s |
150 Lts |
10 |
BPDA6900 |
6900m/2 |
12.5 l/s |
125 l/s |
187.5 Lts |
12.5 |
BPDA8300 |
8300m/2 |
15 l/s |
150 l/s |
225 Lts |
15 |
BPDA10000 |
10000m/2 |
18 l/s |
180 l/s |
270 Lts |
18 |
BPDA13333 |
13333m/2 |
24 l/s |
240 l/s |
360 Lts |
24 |
<< Back to JFC Civils